[OT] .::The Official Mega PTCL Thread::. -- New lines, same old BS

[Aciel]

I have all the access.. Nothing is locked.

Sent from my BKK-LX2 using Tapatalk

That's great. Can you kindly post all the charges of Installation.

Sent from my OnePlus 5 using Tapatalk

 

[iNCEPTiON]

That's great. Can you kindly post all the charges of Installation.

Sent from my OnePlus 5 using Tapatalk

I paid 16,500 PKR for ONT, installation and monthly bill.. I had an option of installment but I didnt opt for it.. Paying full is good. My monthly bill would be 2947PKR with Internet and Phone line (using only for incoming calls).. Plus I have unlimited plus bundle which inlcudes social apps, youtube, netflix at 30Mbps and its unlimited.

Sent from my BKK-LX2 using Tapatalk

 

[ammadfarooq]

Is there a way to acheive more than 50mbps on vdsl2 as after complaining about bandwidth customer care representative came after calling to exchange my line parameters were changed currently i am on 50mbps package

Mode:	VDSL2
Traffic Type:	PTM
Status:	Up
Link Power State:	L0
	Downstream	Upstream
Line Coding(Trellis):	On	On
SNR Margin (0.1 dB):	59	60
Attenuation (0.1 dB):	116	0
Output Power (0.1 dBm):	144	71
Attainable Rate (Kbps):	122140	54856
	Path 0		Path 1
	Downstream	Upstream	Downstream	Upstream
Rate (Kbps):	114995	54856	0	0

 

[Thekool1s]

Is there a way to acheive more than 50mbps on vdsl2 as after complaining about bandwidth customer care representative came after calling to exchange my line parameters were changed currently i am on 50mbps package

Spoiler: show

Mode:	VDSL2
Traffic Type:	PTM
Status:	Up
Link Power State:	L0
	Downstream	Upstream
Line Coding(Trellis):	On	On
SNR Margin (0.1 dB):	59	60
Attenuation (0.1 dB):	116	0
Output Power (0.1 dBm):	144	71
Attainable Rate (Kbps):	122140	54856
	Path 0		Path 1
	Downstream	Upstream	Downstream	Upstream
Rate (Kbps):	114995	54856	0	0

Looks more like 100 mbps.

 

[ammadfarooq]

Looks more like 100 mbps.

yup thats what I am asking I am subscribed to 50mbps package but router xdsl shows 100mbps profile rate.

ptcl trick is that I cant get more than 50mbps down and 25mbps up on speed tests.

only benefit is now I can upload a file at a 25mpbs speed and at same time download file at 50mbps speed without any fluctuation in up/down previously if i upload a file my download speed went down to 20mbps

 

[DDagger]

Does anyone know the password of GPON home internet device with username AdminGPON? When they first installed, it was accepting the default password for this user, but after configuration, it seems they have changed the password. I need to configure a modem port but it is only possible with this username. The other user named "userAdmin" does not have the privileges. Seems like PTCL guys use some common password like the "8288" for the smart TV device config, but what is it?

 

[murtaza12]

Does anyone know the password of GPON home internet device with username AdminGPON? When they first installed, it was accepting the default password for this user, but after configuration, it seems they have changed the password. I need to configure a modem port but it is only possible with this username. The other user named "userAdmin" does not have the privileges. Seems like PTCL guys use some common password like the "8288" for the smart TV device config, but what is it?

Alcatel ONT?

I'll PM you the password.

 

[DDagger]

Alcatel ONT?

I'll PM you the password.

It is Nokia ONT, but I guess if the username is same i.e. "AdminGPON", the password will be the same too probably. So please PM. Thanks.

 

[DDagger]

Alcatel ONT?

I'll PM you the password.

Sorry, that is the default password. It worked before they configured/activated the connection, but they changed to something else afterwards. It doesn't work anymore.

 

[manobilla]

Is there a way to acheive more than 50mbps on vdsl2 as after complaining about bandwidth customer care representative came after calling to exchange my line parameters were changed currently i am on 50mbps package

Mode:	VDSL2
Traffic Type:	PTM
Status:	Up
Link Power State:	L0
	Downstream	Upstream
Line Coding(Trellis):	On	On
SNR Margin (0.1 dB):	59	60
Attenuation (0.1 dB):	116	0
Output Power (0.1 dBm):	144	71
Attainable Rate (Kbps):	122140	54856
	Path 0		Path 1
	Downstream	Upstream	Downstream	Upstream
Rate (Kbps):	114995	54856	0	0

nice can you please post whole statistics page image? hows your errors on the line and other stuff?

 

[ammadfarooq]

nice can you please post whole statistics page image? hows your errors on the line and other stuff?

my house is 150 meters away from msag and 70 meters away from dp which is joined to that msag

Also plz tell, I am subscribed to 50Mbps but my rate on xdsl page is of 100Mbps.....why cant i get more than 50Mbps


Statistics -- xDSL

Mode:	VDSL2
Traffic Type:	PTM
Status:	Up
Link Power State:	L0
	Downstream	Upstream
Line Coding(Trellis):	On	On
SNR Margin (0.1 dB):	75	66
Attenuation (0.1 dB):	116	0
Output Power (0.1 dBm):	144	71
Attainable Rate (Kbps):	127695	54887
	Path 0		Path 1
	Downstream	Upstream	Downstream	Upstream
Rate (Kbps):	114996	54887	0	0
B (# of bytes in Mux Data Frame):	191	247	0	0
M (# of Mux Data Frames in an RS codeword):	1	1	0	0
T (# of Mux Data Frames in an OH sub-frame):	25	64	0	0
R (# of redundancy bytes in the RS codeword):	16	6	0	0
S (# of data symbols over which the RS code word spans):	0.0531	0.1439	0.0000	0.0000
L (# of bits transmitted in each data symbol):	31312	14121	0	0
D (interleaver depth):	603	16	0	0
I (interleaver block size in bytes):	208	127	0	0
N (RS codeword size):	208	254	0	0
Delay (msec):	8	0	0	0
INP (DMT symbol):	1.00	0.00	0.00	0.00
OH Frames:	37507746	16185401	0	0
OH Frame Errors:	5102	285	0	0
RS Words:	2408465430	893160862	0	0
RS Correctable Errors:	64522	6102	0	0
RS Uncorrectable Errors:	294	0	0	0
HEC Errors:	538	0	0	0
OCD Errors:	0	0	0	0
LCD Errors:	0	0	0	0
Total Cells:	2804665277	0	0	0
Data Cells:	337482630	0	0	0
Bit Errors:	0	0	0	0
Total ES:	28	62
Total SES:	21	0
Total UAS:	133	112

 

[Thekool1s]

Your line stats are 'Perfect'. Except for it not being on fast path.

 

[murtaza12]

[MENTION=143443]ammadfarooq[/MENTION]

For the majority of VDSL users, attainable rate is below 100 Mbps, so PTCL only offers up to 50 Mbps on VDSL.

If you can get permission from exchange manager and higher ups, your line can handle 100 Mbps, easily.

It will be a tricky situation though, and I'm not sure they will go for it. Because if you run into issues after upgrading to 100, they will not be able to provide support because they don't technically offer that speed.
And unfortunately PTCL doesn't offer anything between 50 and 100 Mbps, so settling somewhere around 75-80 Mbps also isn't possible.

 

[iNCEPTiON]

my house is 150 meters away from msag and 70 meters away from dp which is joined to that msag

Also plz tell, I am subscribed to 50Mbps but my rate on xdsl page is of 100Mbps.....why cant i get more than 50Mbps


Statistics -- xDSL

Mode:	VDSL2
Traffic Type:	PTM
Status:	Up
Link Power State:	L0
	Downstream	Upstream
Line Coding(Trellis):	On	On
SNR Margin (0.1 dB):	75	66
Attenuation (0.1 dB):	116	0
Output Power (0.1 dBm):	144	71
Attainable Rate (Kbps):	127695	54887
	Path 0		Path 1
	Downstream	Upstream	Downstream	Upstream
Rate (Kbps):	114996	54887	0	0
B (# of bytes in Mux Data Frame):	191	247	0	0
M (# of Mux Data Frames in an RS codeword):	1	1	0	0
T (# of Mux Data Frames in an OH sub-frame):	25	64	0	0
R (# of redundancy bytes in the RS codeword):	16	6	0	0
S (# of data symbols over which the RS code word spans):	0.0531	0.1439	0.0000	0.0000
L (# of bits transmitted in each data symbol):	31312	14121	0	0
D (interleaver depth):	603	16	0	0
I (interleaver block size in bytes):	208	127	0	0
N (RS codeword size):	208	254	0	0
Delay (msec):	8	0	0	0
INP (DMT symbol):	1.00	0.00	0.00	0.00
OH Frames:	37507746	16185401	0	0
OH Frame Errors:	5102	285	0	0
RS Words:	2408465430	893160862	0	0
RS Correctable Errors:	64522	6102	0	0
RS Uncorrectable Errors:	294	0	0	0
HEC Errors:	538	0	0	0
OCD Errors:	0	0	0	0
LCD Errors:	0	0	0	0
Total Cells:	2804665277	0	0	0
Data Cells:	337482630	0	0	0
Bit Errors:	0	0	0	0
Total ES:	28	62
Total SES:	21	0
Total UAS:	133	112

[MENTION=143443]ammadfarooq[/MENTION]

For the majority of VDSL users, attainable rate is below 100 Mbps, so PTCL only offers up to 50 Mbps on VDSL.

If you can get permission from exchange manager and higher ups, your line can handle 100 Mbps, easily.

It will be a tricky situation though, and I'm not sure they will go for it. Because if you run into issues after upgrading to 100, they will not be able to provide support because they don't technically offer that speed.
And unfortunately PTCL doesn't offer anything between 50 and 100 Mbps, so settling somewhere around 75-80 Mbps also isn't possible.

VDSL doesnt support over 50Mbps.. Higher rates are only attainable on GPON.

Sent from my BKK-LX2 using Tapatalk

 

[murtaza12]

VDSL doesnt support over 50Mbps.. Higher rates are only attainable on GPON.

Sent from my BKK-LX2 using Tapatalk

It does support over 50. People get up to 250 Mbps on VDSL abroad.

PTCL just doesn't offer it because of the way they have implemented it here.

 

[iNCEPTiON]

It does support over 50. People get up to 250 Mbps on VDSL abroad.

PTCL just doesn't offer it because of the way they have implemented it here.

Yeah I know.. I was not talking about abroad... I am talking abt PTCL

Sent from my BKK-LX2 using Tapatalk

 

[maazsk97]

my house is 150 meters away from msag and 70 meters away from dp which is joined to that msag

Also plz tell, I am subscribed to 50Mbps but my rate on xdsl page is of 100Mbps.....why cant i get more than 50Mbps


Statistics -- xDSL

Mode:	VDSL2
Traffic Type:	PTM
Status:	Up
Link Power State:	L0
	Downstream	Upstream
Line Coding(Trellis):	On	On
SNR Margin (0.1 dB):	75	66
Attenuation (0.1 dB):	116	0
Output Power (0.1 dBm):	144	71
Attainable Rate (Kbps):	127695	54887
	Path 0		Path 1
	Downstream	Upstream	Downstream	Upstream
Rate (Kbps):	114996	54887	0	0
B (# of bytes in Mux Data Frame):	191	247	0	0
M (# of Mux Data Frames in an RS codeword):	1	1	0	0
T (# of Mux Data Frames in an OH sub-frame):	25	64	0	0
R (# of redundancy bytes in the RS codeword):	16	6	0	0
S (# of data symbols over which the RS code word spans):	0.0531	0.1439	0.0000	0.0000
L (# of bits transmitted in each data symbol):	31312	14121	0	0
D (interleaver depth):	603	16	0	0
I (interleaver block size in bytes):	208	127	0	0
N (RS codeword size):	208	254	0	0
Delay (msec):	8	0	0	0
INP (DMT symbol):	1.00	0.00	0.00	0.00
OH Frames:	37507746	16185401	0	0
OH Frame Errors:	5102	285	0	0
RS Words:	2408465430	893160862	0	0
RS Correctable Errors:	64522	6102	0	0
RS Uncorrectable Errors:	294	0	0	0
HEC Errors:	538	0	0	0
OCD Errors:	0	0	0	0
LCD Errors:	0	0	0	0
Total Cells:	2804665277	0	0	0
Data Cells:	337482630	0	0	0
Bit Errors:	0	0	0	0
Total ES:	28	62
Total SES:	21	0
Total UAS:	133	112

I am just surprised to see that PTCL has set your line for 100mbps and with 8ms delay your overall ping might be around 12-15ms. Do you ever face any disconnections as the SNR margin is less than 10?

 

[manobilla]

I am just surprised to see that PTCL has set your line for 100mbps and with 8ms delay your overall ping might be around 12-15ms. Do you ever face any disconnections as the SNR margin is less than 10?

people in UK have their SNR go as low as 3dBm but still they have stable connections. Its just need line without any distortion in physical connection water and air tight contacts for wires and here your lineman twist two wires together for connection which is not the proper or standard telecom connection

 

[maazsk97]

Stormfiber has been finally granted permission to Wapda Town, Lahore and I have also noticed some digging going around in my area but not sure if its related to Stormfiber but at least now I will be able to threaten PTCL once it goes live in my block about switching providers when they f**k with me.

 

[manobilla]

Stormfiber has been finally granted permission to Wapda Town, Lahore and I have also noticed some digging going around in my area but not sure if its related to Stormfiber but at least now I will be able to threaten PTCL once it goes live in my block about switching providers when they f**k with me.

wow nice you are using ptcl vdsl now? if gpon is available in your area better go for it stormfiber