Review: Xfx gts 250 1gb
- Thread starter AFQ
- Start date
i see mr afq and i have similar interests =p btw afaq you didnt mention your components like processor used , Ram used , OS , PSU etc ... and you can make your graphs in microsoft word and print screen them to JPG people want to see graphs of the games your reviewing it will be more eye catching and why dont you compare this to ANOTHER card like the 4850 etc ? i mean this is a pretty one sided review it will be more interesting to see you put Ati VS Nvidia head to head
well guyz ATI 4850 n 9800GTX+ are both are some ...some time 4850 is lil higher n sometimes 9800gtx+ is lil higher...i used the both brands and i didnt faced any problems...
Kindly use the inbuilt benchmark of farcry2 and post the results with complete settings like resolution etc.
these two cards have made go gaga...........
as i intend to buy a card i think the gts250 would my choice for its lower price (as there a difference of 19/20
btw these cards in favour of the gts250)
contradict me if i am wrong
as i intend to buy a card i think the gts250 would my choice for its lower price (as there a difference of 19/20
btw these cards in favour of the gts250)
contradict me if i am wrong
@Baber Kamal
bro i cant find inbuilt benchmark tool anywhere, tell me where it is???
---------- Post added at 08:08 PM ---------- Previous post was at 07:36 PM ----------
i found built in bechmark tool.
updated first post.
bro i cant find inbuilt benchmark tool anywhere, tell me where it is???
---------- Post added at 08:08 PM ---------- Previous post was at 07:36 PM ----------
i found built in bechmark tool.
updated first post.
amazing results in farcry2 inbuilt benchmark, u getting 45FPS at the same resolution with same settings i'm getting around 37FPS. Hmmmmm, does farcry2 hav some nvidia cards optimization??? Coz according to the specs my card sould be well ahead GTS250 specially when my processor is overclocked to around 3.7Ghz and ram to 1000MHz. And Mr. AFQ is running everything at stock
I haven't seen your other benchmarks yet. Can you please tell me what part of the game you achieved those results at? Did you run the Warhead benchmark tool?
I think he benchmarked Crysis at 1024x768 resolution, because a GTS250 only at this resolution will give you 55 frames Avg.
And what about the farcry 2 resolution?? Did u perform benchmark at 1280 x 1024 or 1024 x 768 resolution???
@necrokiller
nro all the benchmarks are given in the first post.
---------- Post added at 10:25 AM ---------- Previous post was at 10:24 AM ----------
@necrokiller
@all
i did ait with fraps, its crap software.
it only calculates fps but dont stress gpu.
---------- Post added at 10:26 AM ---------- Previous post was at 10:25 AM ----------
@abobobilly
bro every bwnchmark is at 1280*1024 as mentioned in the first post.
---------- Post added at 10:27 AM ---------- Previous post was at 10:26 AM ----------
@all
now i benchmarked warhead in the following way.
results are in first post.
Here's how to do it:
1. Go to the Bin32 subfolder of crysis warhead.
2. Create a file called Benchmark_GPU_cargo.bat
3. Inside the file type :
@echo Running GPU benchmark 1
@echo Results will depend on current system settings
@pause
@echo Running...
@crysis.exe -DEVMODE +map cargo +exec timedemo
@type "..\Game\Levels\cargo\timedemo.log"
@pause
4. Save the file.
5. Go to the Game folder and then to the Level subfolder.
6. Go to the Cargo folder.
7. Look for a file named flythrough.tmd
8. Make a backup of that file and save it some where other than this folder.
8. Rename the original flythrough.tmd file to timedemo.tmd
9. Create a file in this folder named timedemo.log
10. Go to the Game folder and then to the Config subfolder.
11. Create a file named timedemo.cfg
12. Inside the file type :
demo_file = timedemo
demo_num_runs = 3
13. Save the file.
14. Create a file named benchmark_gpu.cfg
15. Inside the file type :
demo_restart_level = 1
g_godMode = 1
demo_file = timedemo
demo_ai = 0
demo_num_runs = 3
demo_quit = 1
hud_startPaused = "0"
sys_flash = 0
r_vsync = 0
r_nodrawnear = 1
demo
demo_time_of_day = 8
s_DialogVolume = 0
16. Save the file.
17. Go back to the Bin32 folder, and run your Benchmark_GPU_cargo.bat file.
18. Crysis Warhead will load up the level.
19. When it starts it hold down the SHIFT AND PRINTSCREEN keys on your keyboard. This will start up your benchmark run.
20. After the benchmark has finshed, close down warhead to see your score on the desktop.
---------- Post added at 10:32 AM ---------- Previous post was at 10:27 AM ----------
@Baber Kamal
bro it is stated in first post that all benchmars are at 1280*1024.
and how did u benched crysis on ur palit 4850???
nro all the benchmarks are given in the first post.
---------- Post added at 10:25 AM ---------- Previous post was at 10:24 AM ----------
@necrokiller
@all
i did ait with fraps, its crap software.
it only calculates fps but dont stress gpu.
---------- Post added at 10:26 AM ---------- Previous post was at 10:25 AM ----------
@abobobilly
bro every bwnchmark is at 1280*1024 as mentioned in the first post.
---------- Post added at 10:27 AM ---------- Previous post was at 10:26 AM ----------
@all
now i benchmarked warhead in the following way.
results are in first post.
Here's how to do it:
1. Go to the Bin32 subfolder of crysis warhead.
2. Create a file called Benchmark_GPU_cargo.bat
3. Inside the file type :
@echo Running GPU benchmark 1
@echo Results will depend on current system settings
@pause
@echo Running...
@crysis.exe -DEVMODE +map cargo +exec timedemo
@type "..\Game\Levels\cargo\timedemo.log"
@pause
4. Save the file.
5. Go to the Game folder and then to the Level subfolder.
6. Go to the Cargo folder.
7. Look for a file named flythrough.tmd
8. Make a backup of that file and save it some where other than this folder.
8. Rename the original flythrough.tmd file to timedemo.tmd
9. Create a file in this folder named timedemo.log
10. Go to the Game folder and then to the Config subfolder.
11. Create a file named timedemo.cfg
12. Inside the file type :
demo_file = timedemo
demo_num_runs = 3
13. Save the file.
14. Create a file named benchmark_gpu.cfg
15. Inside the file type :
demo_restart_level = 1
g_godMode = 1
demo_file = timedemo
demo_ai = 0
demo_num_runs = 3
demo_quit = 1
hud_startPaused = "0"
sys_flash = 0
r_vsync = 0
r_nodrawnear = 1
demo
demo_time_of_day = 8
s_DialogVolume = 0
16. Save the file.
17. Go back to the Bin32 folder, and run your Benchmark_GPU_cargo.bat file.
18. Crysis Warhead will load up the level.
19. When it starts it hold down the SHIFT AND PRINTSCREEN keys on your keyboard. This will start up your benchmark run.
20. After the benchmark has finshed, close down warhead to see your score on the desktop.
---------- Post added at 10:32 AM ---------- Previous post was at 10:27 AM ----------
@Baber Kamal
bro it is stated in first post that all benchmars are at 1280*1024.
and how did u benched crysis on ur palit 4850???
I downloaded "crysis benchmark tool" for crysis1
Here's the link
http://downloads.guru3d.com/Crysis-Benchmark-Tool-1.05-Final-download-1791.html
then i downloaded tool for crysis warhead benchmarking and here's the link
http://downloads.guru3d.com/Crysis-WARHEAD-Benchmark-Tool-BETA-download-2072.html
and still it's a mystery that how u got avg 45fps at default processor speed
Here's the link
http://downloads.guru3d.com/Crysis-Benchmark-Tool-1.05-Final-download-1791.html
then i downloaded tool for crysis warhead benchmarking and here's the link
http://downloads.guru3d.com/Crysis-WARHEAD-Benchmark-Tool-BETA-download-2072.html
and still it's a mystery that how u got avg 45fps at default processor speed
@Baber Kamal
bro em not gettin 45fps, em gettin 40fps.
i will upload benchies by the tool u used.
---------- Post added at 05:31 PM ---------- Previous post was at 05:31 PM ----------
@Newbie
thanx bro.
---------- Post added at 05:32 PM ---------- Previous post was at 05:31 PM ----------
3d mark 06 score comin soon.
bro em not gettin 45fps, em gettin 40fps.
i will upload benchies by the tool u used.
---------- Post added at 05:31 PM ---------- Previous post was at 05:31 PM ----------
@Newbie
thanx bro.
---------- Post added at 05:32 PM ---------- Previous post was at 05:31 PM ----------
3d mark 06 score comin soon.
You really need to specify which scene in the game you are running the benchmark on. Averaging 55fps in Crysis Warhead at Enthusiast 1280x1024 is kinda hard to believe. Were you staring at the skies in the bench run?
Last edited:
We have disabled traderscore and are working on a fix. There was a bug with the plugin | Click for Discord
- No one is chatting at the moment.
-
Aciel:
Online session is enabled for UBL. I have an active subscription with my NayaPay card (it is already added to Google Payment Methods). -
Aciel:
I tried both NayaPay, and UBL, but I keep getting "correct country selected..." error. I already have PK set there
-
Necrokiller:
The only valid thing from his pov he said in the video is AC dead since Black Flag. According to woke police that game was woke too. Welsh man in West Indies. So atleast he's consistent I guess lol
-
Necrokiller:
It's based on an actual real life person so I don't think the woke police have a valid case here.
-
XPremiuM:
Meanwhile Ghost of Tsushima PC version is out now. Looks 100 times better than ASS Creed already. -
XPremiuM:
Did y'all see the new Assassin's Creed trailer? They finally made a AC set in Japan & then they put a negro as the male protagonist. Ubisoft is taking cues from Disney, and it isn't gonna end well for them, just like Disney. Go woke, go broke!
-
Necrokiller:
Phil should be held responsible for this shitfest too, just like Sarah, but it's highly likely that these decisions are coming from Satya. And this isn't even the end of it. More closures are coming.
-
SolitarySoldier:
if we are moving towards more and more popular trash across platforms that make billions for companies, I'm happy with all the barriers and exclusivity because at least that brings some pressure to create good stuff.
