GTS 250 With Pentium D 3.0 . Is the combination fine . Or i would need a better Processor 
. But Will the card work or not if it will then how much cut off!
. But Will the card work or not if it will then how much cut off!
[RETIRED] WHAT TO BUY ? : Need buying advice, ask here!
- Thread starter Sire Ahsan
- Start date
- Status
@afnansj: Brother GTS 250 will definitely work with ur pentium D but the performance will be bottlenecked due to the processor, but not sure by how much. U can go on to purchase the GTS250, use it and if u still find some lack of performance then later on u can go on to upggrade ur processor.
@poizon n Babar, thank you guys..
HIS on this particular model has some reliability issues, read somewhere!
I'll go with sapphire i guess it'll also save me 800 rupees!
what do you guys say?
cheers..
HIS on this particular model has some reliability issues, read somewhere!
I'll go with sapphire i guess it'll also save me 800 rupees!
what do you guys say?
cheers..
Buy a Sapphire HD4830 (from www.czone.com.pk ) and spend the rest on a decent Processor.GTS 250 With Pentium D 3.0 . Is the combination fine . Or i would need a better Processor
@Rafay: I don't think CM690 comes with any psu, it's without any psu so u've to buy a seperate psu and on the second part it doesn't hav any fans pre installed or maybe one rear fan installed for that i'm not sure.
^Rafay:
Get a simple generic full tower case, add a decent CPU cooler to that and you are done. get some grooves made in the motherboard tray from a local metal works for cable management. If you want to mod your case, you can have them cut the side panel to desired shape. Add some eye candy to your generic case and beat the crap by cooler master.
Get a simple generic full tower case, add a decent CPU cooler to that and you are done. get some grooves made in the motherboard tray from a local metal works for cable management. If you want to mod your case, you can have them cut the side panel to desired shape. Add some eye candy to your generic case and beat the crap by cooler master.
^^ thanks buddies for advices.....i was thinking about promedia casing.....its for 2800 comes with side panel...im not sure if it can accommodate 2X120mm fans that i recently purchased.....can u suggest any other generic tower case that is roooooomy...i need space inside the cabinet.....i can easily buy a cPU cooler if i go with promedia...GPU is always under 60 so not a prob....its the mobo that needs some cooling
---------- Post added at 07:26 PM ---------- Previous post was at 07:21 PM ----------
got this pic from "Post your PC pic" thread....this promedia casing is roomy with side panel
---------- Post added at 07:26 PM ---------- Previous post was at 07:21 PM ----------
got this pic from "Post your PC pic" thread....this promedia casing is roomy with side panel
awsome looking setup bro!^^ thanks buddies for advices.....i was thinking about promedia casing.....its for 2800 comes with side panel...im not sure if it can accommodate 2X120mm fans that i recently purchased.....can u suggest any other generic tower case that is roooooomy...i need space inside the cabinet.....i can easily buy a cPU cooler if i go with promedia...GPU is always under 60 so not a prob....its the mobo that needs some cooling
---------- Post added at 07:26 PM ---------- Previous post was at 07:21 PM ----------
got this pic from "Post your PC pic" thread....this promedia casing is roomy with side panel
may i ask you where did you get this table?
& how much did it cost you.
& how much it would cost ME if i want to buy it with glass instead of wood?
@Kayani.
The same i've suggested to another member and here it goes:
P5QL-CM for 8200
Processor E7400 for 10100
HDD 320GB for 4300
Ram Xms2 DHX 2 x 1GB for 3100
Casing Normal for around 1500
CM 460 PSU for 3400
Graphic Card xfx 9800gt for 11000
Now if u wana go low than that then replace 9800gt with 9600gso which is for 7.8K and replace e7400 with e5200 which is for 6k so it will save u some 7K.
The same i've suggested to another member and here it goes:
P5QL-CM for 8200
Processor E7400 for 10100
HDD 320GB for 4300
Ram Xms2 DHX 2 x 1GB for 3100
Casing Normal for around 1500
CM 460 PSU for 3400
Graphic Card xfx 9800gt for 11000
Now if u wana go low than that then replace 9800gt with 9600gso which is for 7.8K and replace e7400 with e5200 which is for 6k so it will save u some 7K.
well i ain't a certified guru bro, tvs do not falls into computer world, the forum is all about pc and stuff
well i don't know if you will be comfortable with night vision googles :s coz it totally changes the view, u know greenish type.....i think u should consult ur optician and tell about ur situation.....
well i don't think HIS 4830 has any issues, Vyrus on the same forum has HIS 4830 and i think he is pretty much satisfied....you can consult him for the performance......
4830 gpus do not get much heated, so u can even go with stock sapphire version....
@baber.....nice work bro, i am not able to visit the forum very frequently as i usually do but you are doing good work, keep it up....
Thanx bro, but yar i'm missing u on the forum, as i had a problem and i posted it on technical problem thread but no one answered. Kindly luk into it. And in last i must say u r the authentic guru on this forum i'm just following ur foot steps.
yaar ma "Abu Gee" himself is a doctor~!
i dont want to go to any optician, coz he would only suggest me to make glasses (numbered lens), & that i dont want to wear.........
coz ma eye sight is not THAT weak, just a little bit you can say "+1.2" if you understand the numbering of these lenses.
thanx for ur compliments.....ok i think u have posted ur problem in tech section, i will see and reply there if i find any solution.....
why big glasses yar?? i think now a days contact lenses are more common, aren't they?? but i still think night vision googles while driving is a good idea coz it is only used for pitch black conditions normally, wearing night vision google may end up in u hitting someone :clap
btw i don't understand numbering of eyesight :s
o ali my frnd, remember me cyborg, we met on left4dead and burnout paradiese
....ok what kind of grip u have, palm or claw based?? means do u stress ur palm more while holding the mouse or the your fingers??Most razer mice are claw based and most logi mice are palm based except mx 518 which looks more like palm+claw design.....i think u should look at Steel Series mice on www.vmart.pk too and see if any of that fits ur budget.....
Monitor and TV Device good enough?
Hey I was just wondering that I'm going to buy a T220 monitor with the DANY HD-333L TV device purely for gaming(XBOX 360 via vga cable), watching movies and TV. So, are these good? If you have other recommendations please tell me. My budget is Rs: 30000
Hey I was just wondering that I'm going to buy a T220 monitor with the DANY HD-333L TV device purely for gaming(XBOX 360 via vga cable), watching movies and TV. So, are these good? If you have other recommendations please tell me. My budget is Rs: 30000
@fajoo24
My current specs are
Pentium D 3.0 2x2Mb Cache
Intel 945GNTL board
512 Mb Ram 533 Kingston
80 GB HD Seagate
Normal Power Supply
I want to change the specs to:
A gpu inclusion which is worth the money to my mind
250 GB HD Seagate
Asus 550 Watt psu
2x2GB Kingston Ram 667
A DVD R/W
Whose are 9800GX2 so call replacements..?
My current specs are
Pentium D 3.0 2x2Mb Cache
Intel 945GNTL board
512 Mb Ram 533 Kingston
80 GB HD Seagate
Normal Power Supply
I want to change the specs to:
A gpu inclusion which is worth the money to my mind
250 GB HD Seagate
Asus 550 Watt psu
2x2GB Kingston Ram 667
A DVD R/W
Whose are 9800GX2 so call replacements..?
Is there any need of P5QL-CM??
I was thinking of spending more on processor and ram.
Wat wud u guys say to my current rig,is it balanced?
---------- Post added at 12:13 PM ---------- Previous post was at 12:09 PM ----------
And i was gonna prefer ati gpu,suggestion plz.
- Status
We have disabled traderscore and are working on a fix. There was a bug with the plugin | Click for Discord
- No one is chatting at the moment.
-
Necrokiller:
Phil should be held responsible for this shitfest too, just like Sarah, but it's highly likely that these decisions are coming from Satya. And this isn't even the end of it. More closures are coming. -
SolitarySoldier:
if we are moving towards more and more popular trash across platforms that make billions for companies, I'm happy with all the barriers and exclusivity because at least that brings some pressure to create good stuff. -
SolitarySoldier:
Phil keeps talking about breaking barriers to gaming, making it accessible on all platforms yada yada, while killing competition and creativity at the same time. the fact that i actually believed him for a second lol
-
SolitarySoldier:
"These changes are not a reflection of the creativity and skill of the talented individuals at these teams or the risks they took to try new things" ... seems to me that's exactly what it is
-
XPremiuM:
Microsoft deserves all the hate they can get. Seriously i can't explain how much i want to curse them out. -
XPremiuM:
They could've sold the studios instead of closing them, but the nazi bastards just didn't want competition down the road.
-
XPremiuM:
What's the f*** is wrong with them? I mean really? Have they completely lost it? F***ing retards.
-
XPremiuM:
So i just found out that f***ing s***bag Microsoft shut down Arkane Studio (makers of the brilliant Dishonored series) and Tango Gameworks (makers of the iconic The Evil Within series), among some other studios. I just want to say a giant F*** Y**! to Microsoft. THEY'VE F***ED UP BIG TIME this time.
-
XPremiuM:
Started Dead Island 2, and i find it pretty lame. The story is shit. The characters are either cringe or bland (all 6 of them), The gameplay isn't fun. Even the goddamn zombies don't behave like proper zombies. They're all fast & intelligent unlike how zombies are supposed to be like. Any fan of "zombie" genre cannot possibly like this shitfest of a game. Dying Light 2 was million times better than this shit.
