Hello all!
If anyone has any advice, recommendations, or experience with this it would be very much appreciated!
I recently upgraded my graphics card from Gigabyte 6850 (1 GB) to Gigabyte 7850 (2 GB – New bought yesterday in 2 year warranty) which was running perfectly in my PC.
So the problem starts from installing CCC (or only driver set). I'm getting Blank screen when I reach the Windows Login Screen after 1[SUP]st[/SUP] boot of CCC or only driver installation. My system gets halted in blank screen state after few seconds from Windows loading logo and I have to restart it manually. I have tried different drivers specifically from Gigabyte website and fro its original cd but the problem persist. I have also seen BSOD error couple of time but I can’t read the msg as it disappears after quick session. Every time I have to go in SAFE MODE to Device Manager and uninstall my Radeon 7800 Drivers to make computer stable.
I can get to windows just fine without any drivers. The “Standard VGA Graphics Adapter" drivers enables me to set resolutionsomething like 1366 X ___ ( sorry I don’t remember yet ) but cant find the information in Dxdiag . Only MSI Kombustor detect 7850 in info. & nothing more.
I've tried:
Windows Memory Test - No Errors Found
Removed each and every GPU related softwares & drivers including MSI Kompuster , CCC afterburner , Gigabyte GURU and then install only driver locating from device manger .
System specs:
Gigabyte 7850 2GB OC 3.0
MSI – 970A G - 46
AMD Phenom II X4 965 ( @ 3.4 Ghz stock speed )
Hyper 212 with TWO High RPM 120 mm fans ( Push And Pull )
Kingston Hyper X ( Red Edition ) @ 1600 Mhz
Windows 7 64 BIT Ultimate
Samsung P 2370 ( 23 Inch ) 1920x1080 LCD Monitor
PSU : HIPRO 700 Watt
A bit of searching around the internet has shown that there are a few others with similar problems, some only getting some of the errors, others getting them all + bsods.
I believe that it is software / driver related issue and returning the card will be my last option, If anyone has any advice, recommendations, or experience with this it would be very much appreciated! You may text your cell no so that I will call you back and discuss the matter in detail.
Regards ,
Tanveer
0300 - 8925469
If anyone has any advice, recommendations, or experience with this it would be very much appreciated!
I recently upgraded my graphics card from Gigabyte 6850 (1 GB) to Gigabyte 7850 (2 GB – New bought yesterday in 2 year warranty) which was running perfectly in my PC.
So the problem starts from installing CCC (or only driver set). I'm getting Blank screen when I reach the Windows Login Screen after 1[SUP]st[/SUP] boot of CCC or only driver installation. My system gets halted in blank screen state after few seconds from Windows loading logo and I have to restart it manually. I have tried different drivers specifically from Gigabyte website and fro its original cd but the problem persist. I have also seen BSOD error couple of time but I can’t read the msg as it disappears after quick session. Every time I have to go in SAFE MODE to Device Manager and uninstall my Radeon 7800 Drivers to make computer stable.
I can get to windows just fine without any drivers. The “Standard VGA Graphics Adapter" drivers enables me to set resolutionsomething like 1366 X ___ ( sorry I don’t remember yet ) but cant find the information in Dxdiag . Only MSI Kombustor detect 7850 in info. & nothing more.
I've tried:
Windows Memory Test - No Errors Found
Removed each and every GPU related softwares & drivers including MSI Kompuster , CCC afterburner , Gigabyte GURU and then install only driver locating from device manger .
System specs:
Gigabyte 7850 2GB OC 3.0
MSI – 970A G - 46
AMD Phenom II X4 965 ( @ 3.4 Ghz stock speed )
Hyper 212 with TWO High RPM 120 mm fans ( Push And Pull )
Kingston Hyper X ( Red Edition ) @ 1600 Mhz
Windows 7 64 BIT Ultimate
Samsung P 2370 ( 23 Inch ) 1920x1080 LCD Monitor
PSU : HIPRO 700 Watt
A bit of searching around the internet has shown that there are a few others with similar problems, some only getting some of the errors, others getting them all + bsods.
I believe that it is software / driver related issue and returning the card will be my last option, If anyone has any advice, recommendations, or experience with this it would be very much appreciated! You may text your cell no so that I will call you back and discuss the matter in detail.
Regards ,
Tanveer
0300 - 8925469