So all of you guys must be wondering where i went off to... well lets just say study loads and kinda a new hobby....
see i got a mad love for music..and this is an SQ(sound quality) setup...not the lame Dhuzz dhuzz... people who have demo'ed it in person know what im talkin bout !
I need comments people...what do u guys think ?
Lemme start by listing the parts…. Then pics shall follow…
And now the pics of the stuff installed….
First off …
Pioneer 5100UB Headunit
Soundstream Tarantula Series TRA 680.4
JBL P650c Power Series
Pioneer TS-A6990S
JL Audio 12w3v2 D4
Kenwood KAC-X811D Mono
Pyramid Audio 2.0 Farad Capacitor
4 Gauge wiring was used throughout for the power and grounds…Grounds properly sanded and bolted to ensure proper current flow…14 gauge speaker wire was used for the front and rear speakers so they are not left starved for power…which they usually are when our local crap wires are used in systems…Also 10 gauge speaker wire was used for the subs !
Zipties were used with the wires throughout to ensure a neat install and managed cables…
Thimbles were used for the install wherever possible…so a proper contact was maintained with the terminals…
Two parts of the BIG 3 were done….i.e Chassis to neg terminal…and chassis to Engine block…. 1/0 Gauge wiring was used for this….
Looking Forward to your comments guys....Comments/Criticism and suggestions always welcome with open arms...
see i got a mad love for music..and this is an SQ(sound quality) setup...not the lame Dhuzz dhuzz... people who have demo'ed it in person know what im talkin bout !
I need comments people...what do u guys think ?
Here it is....the setup in all its glory !
Lemme start by listing the parts…. Then pics shall follow…
- Pioneer 5100UB Headunit (US based Model)
- Soundstream Tarantula Series TRA 680.4 4 channel amplifier
- JBL P650c Power Series 6 ¾” 90W RMS Component System (Front Stage)
- Pioneer TS-A6990S 80W RMS 6x9 coaxial (Rear fill)
- JL Audio 12w3v2 D4 subs (PAIR) in 1.25cuft each sealed enclosure
- Kenwood KAC-X811D Mono amplifier
- Pyramid Audio 2.0 Farad Capacitor
- SoundQuest by Stinger 4 gauge Wiring throughout/Speaker wiring 14 gauge/Subs wiring 10 gauge
And now the pics of the stuff installed….
First off …
Pioneer 5100UB Headunit
Soundstream Tarantula Series TRA 680.4
JBL P650c Power Series
Pioneer TS-A6990S
JL Audio 12w3v2 D4
Kenwood KAC-X811D Mono
Pyramid Audio 2.0 Farad Capacitor
4 Gauge wiring was used throughout for the power and grounds…Grounds properly sanded and bolted to ensure proper current flow…14 gauge speaker wire was used for the front and rear speakers so they are not left starved for power…which they usually are when our local crap wires are used in systems…Also 10 gauge speaker wire was used for the subs !
Zipties were used with the wires throughout to ensure a neat install and managed cables…
Thimbles were used for the install wherever possible…so a proper contact was maintained with the terminals…
Two parts of the BIG 3 were done….i.e Chassis to neg terminal…and chassis to Engine block…. 1/0 Gauge wiring was used for this….
Looking Forward to your comments guys....Comments/Criticism and suggestions always welcome with open arms...