[RETIRED] ASK A GURU : Technical trouble with your PC ? ASK HERE

[MonoQ]

:_(..and just when i spent dozens on a new processor upgrading from an old Pentium,
the one which is 2 generations older (sandy bridge) is still better..

 

[MonoQ]

[MENTION=21647]nafu[/MENTION]
Also, if u can post ur prime 95 results..at stock small FT smthng torture test....
I read that the new prime 95 is not a good update..many are running with the old prime 95 version 26.

 

[nafu]

@MonoQ

i5 2500 @Stock with CM V6GT

@4.0Ghz

 

[Voodoo]

@MonoQ

• i7 2600k @ 4 GHz
• Prime 95 v28.4 build 1
• Small FFT Test for 10 minutes
• Thermalright Venomous with 120mm fan @ 1500 RPM
• MX-2 paste applied with the previous cooler TRUE120
• Casing:- HAFx with stock fans
• Room temps about 32~33c

I didn't tried lower vcore ... it might be possible

 

[MonoQ]

Thx for the tests...last night i opened up the processor, cleaned the paste and reapplied everything with the stock intel cooler..same results..so then i switched back to the nepton and assembld everything again..some better results..
however, now the temps get to 70C at full load (@4.4ghz)..and im talking about the individual core temps..still pretty better than the last results.

 

[MonoQ]

Also, does it matter if im using the Intel integrated GPU instead of a dedicated GPU? is there any difference between the temps?

 

[nafu]

Also, does it matter if im using the Intel integrated GPU instead of a dedicated GPU? is there any difference between the temps?

I dont think so.


Good temps now
Sent from my GT-S5660 using Tapatalk 2

 

[Faique Barlas]

Hey Guyzz I am in trouble and need help.
I have HP workstation XW6400
Few days back it is not detecting its builtin LAN card.
I have attached an external lan card but it is also undetected.
I am searching in Bios setup for any option that can help.
While I saved the bios setup and restart its gone no display and no response even If I pulled out Rams still no response.
I have re plugged all the cables and disconnected all hardwares then tried but same problem.

I read instruction from PC case and change Jumper to Boot block emergency recovery mode then it is giving this error

I have downloaded Bios from HP website and flash the rom with usb but after restarting it comes to the same screen and if jumper is at its initial position then no response from CPU.

Please help if any one can solve this issue.
do someone repair its BIOS?
The shop guy from which I purchased this machine is asking to change the entire bareborn cpu.

 

[hasnainbinsaeed]

Hard disk gives blue screen.any possible solutions?

 

[lostworld]

Hard disk gives blue screen.any possible solutions?

your hdd is dying bro, backup ur data

 

[umair23]

Salam PG members. Now the question asked has probably been asked numerous number of times but it would be really appreciated if one of you guys could outline a step by step tutorial on how I can play a counter strike 1.6 one on one match through Hamachi with a friend of mine who lives 10 mins away from my household. Keep in mind that we both use desktop computers. Thanks in advance

 

[umair23]

Anyone????

 

[RameeX]

Nvidia 8600GT showing greenlines/dots on screen...
how to repair > youtube etc > bake it in oven > ok

BUT the real question is on what temperatures and for how long ? i don't have range oven but i have microwave oven :/

 

[Majawar]

^Well baking always doesn't solve this problem. You better get it to any repair guy at Hafeez centre and see what he can do. There are some good repairing shops at top floor.

Anyone????

There are around 1000s of youtube tutorials out. Check them. The guidelines are pretty much straight forward.

 

[ahadafzal13]

I am Using Samsung S22C350H 22 inch screen over hdmi. I am facing a black screen issue over hdmi I have tried almost all cheap hdmi. currently using manhattan hdmi

Problem comes on hdmi

System
Core i5 2400 3.1 ghz
Asus P8H61-V
8 Gb Kingston Ram
1 Gb Asus GTX 650 Card
Corsair Vs650 Power Supply

Please Help me with this issue my number is 03212101415 or PM me

[video]http://vid897.photobucket.com/albums/ac171/ahadafzal13/VIDEO0029_zpsabb7ed24.mp4[/video]
http://vid897.photobucket.com/albums/ac171/ahadafzal13/VIDEO0029_zpsabb7ed24.mp4

 

[Majawar]

^Doesn't seems like Samsung eco feature.

Kindly plug in a dvi or vga and see if the problem still exists. Also your PC on UPS?

A wild guess is that the problem might be with your house wiring system. Their may be some kind of power leak. So try to change the extension power source. Maybe connect your PC to
any other switch board and see if it solves the problem.

 

[mave3]

Bro for the lcd install its proper drivers and chk with dvi cable aawell issue should be resolved......

Sent from my GT-I9300 using Tapatalk 2

 

[SalmanK]

Pc does not boot when gpu is connected with 6 pin pcie cable . PSU is new . boots on onboard graphics

 

[ahadafzal13]

I have Tried Dvi Port and all other extension and different powersources. I Think it is Samsung Eco Feature

 

[Majawar]

Pc does not boot when gpu is connected with 6 pin pcie cable . PSU is new . boots on onboard graphics

Which PSU are you using and GPU? Also try GPU on another PC.