[GUIDE]OverClocking on Intel Motherboards

[Cerberus]

no in stress ,, that mean its fine ,,thx bro ,,,

but what about memory ?

in your motherboard bios reduce ram to 333mhz (667mhz) and u will get more overclocking

 

[a7mEd]

in your motherboard bios reduce ram to 333mhz (667mhz) and u will get more overclocking

ahaa,, i done ,, now i overclocked it to 222 FSB .. 3.4 ghz.. and DRAM 453.3 mhz .. ,, is it dangerous if it goes up 400 ??

 

[Cerberus]

not dangerous till it is stable

 

[neokfriendz]

done OC at my DG31PR wid C2D 2.53GHz
OC only 10% and my C2D boost to 2.8GHz
cant reduce ram from 800mhz to 667mhz from bios, so didnt try harder

PLL for DG31PR = CV190BPAG

 

[Cerberus]

done OC at my DG31PR wid C2D 2.53GHz
OC only 10% and my C2D boost to 2.8GHz
cant reduce ram from 800mhz to 667mhz from bios, so didnt try harder

PLL for DG31PR = CV1908PAG

Good, i will telll you detail on reducing ram bus

 

[javed]

Thanks!:GL:
Its also Works on Intel DG31PR Board (PLL CV190BPAG)View attachment 61100

My system hangs as I set fsb but when I restart it, my fsb changed (Do not power off system completely)

 

[Muhammad Faraz]

Thanks!:GL:
Its also Works on Intel DG31PR Board (PLL CV190BPAG)View attachment 61100

My system hangs as I set fsb but when I restart it, my fsb changed (Do not power off system completely)

use clock gen it will oc without restart pll idt cv174cView attachment 61165

 

[neokfriendz]

Cerberus, can you tell me how to decrease the ram from 800 to 667mhz??
because of it, im not OC'ing

 

[javed]

use clock gen it will oc without restart pll idt cv174cView attachment 61165

Thanks Muhammad Faraz!
Clockgen is better than setfsb
I overclocked to 300 fsb, will you tell me how much can i overclock on DG31PR Motherboard

[HR][/HR]

Play Games Till Death!
​

 

[neokfriendz]

Thanks Muhammad Faraz!
Clockgen is better than setfsb
I overclocked to 300 fsb, will tell how much can i overclock on DG31PR Motherboard

javed, how did u manage to decrease the bus of ur ram from bios??
i got 800mhz on dg31pr but can't decrease the bus

 

[javed]

javed, how did u manage to decrease the bus of ur ram from bios??
i got 800mhz on dg31pr but can't decrease the bus

There is no bus option to change in bios. My bios shows 667 bus speed of DDR2 (1 GB)
I Don't know anything Else...

[HR][/HR]

Play Games Till Death!
​

 

[Generall]

javed, how did u manage to decrease the bus of ur ram from bios??
i got 800mhz on dg31pr but can't decrease the bus

You can try adding a 667 MHz RAM stick which will force the 800 MHz RAM stick to run at 667 MHz.
Another advanced but very risky option is SPDTool. ( Haven't tried it yet as it's risky )

 

[Awais Khan]

better to buy an overclocking capable motherboard..

 

[Cerberus]

You can try adding a 667 MHz RAM stick which will force the 800 MHz RAM stick to run at 667 MHz.
Another advanced but very risky option is SPDTool. ( Haven't tried it yet as it's risky )

no in bios u can reduce...
Neo sorry..i was out of city...will tell you today

---------- Post added at 02:42 PM ---------- Previous post was at 02:42 PM ----------

better to buy an overclocking capable motherboard..

better to stay out of thread

 

[mhasan92]

can anyone pleaseeeee tell me the PLL of INTEL DG43NB.. i amunable to find it and is it safe to overclock on this board?? i heard its a bit risky.. please help me out ASAP

 

[mhasan92]

I tried everything on DG43NB.. exactly follow the steps mentioned.. but my BUS speed is not increasing in CPUZ neither in Setfsb

 

[Ali Man]

can anyone pleaseeeee tell me the PLL of INTEL DG43NB.. i amunable to find it and is it safe to overclock on this board?? i heard its a bit risky.. please help me out ASAP

Already have told to you to your thread in the help section, but you still are pushing it.
Pretty lame man.

 

[Baghi]

Ali Man. You ain't helping him at all, just annoying. Faheem please help the guy out and tell him the code of DG43NB, thank you!

 

[Ali Man]

I tried everything on DG43NB.. exactly follow the steps mentioned.. but my BUS speed is not increasing in CPUZ neither in Setfsb

Re: cpu OC on Intel DG43NB mobo

Intel reference mobos generally suck at overclocking.
There is no OC option in BIOS, But there are ways you can still try:

01. You can try the 333 FSB BSEL Mod. The CPU needs to be able to run with default voltage though.You will be able to find some details here : http://www.overclock.net/intel-cpus/...mod-guide.html

02. Software OC: try SetFSB or ClockGen. Its not as good as Hardware OC.

03. Flash your mobo with a modified BIOS so you would be able to OC from there. Theres a few forum where you can request for a modified BIOS or see if theres already one. Google to find them.

04. Go for another mobo .... Thats the final option!!!​

GoodLuck.......

 

[mhasan92]

I asked fahim bhai.. the only possible way to overclock in DG43NB is to use BSEL mode which i don't know how to use