[RETIRED] ASK A GURU : Technical trouble with your PC ? ASK HERE

Status
Not open for further replies.

ps3linux

ARM Programmer/Hardware Design
Dec 1, 2009
290
0
21
Islamabad
Hi PcHelpDesk


SOS call to all mac users and hackintosh builders


Im setting up a new custom build for mac mountain lion 10.8.3


iv got the following options


iv chosen GIGABYTE H61M DS2 REV 2.0 for my motherboard
160GB HDD WD
2GB RAM DDR3


for the processor i have the INTEL PENTIUM G2010 but as it seems it doesnt support HD2000/3000/4000 graphics
another option is INTEL I3 2100


im stuck at the final installation though....


is any body here who has first hand experience of building a hackintosh with similar specs or who can help me out


please post or pm


no matter how little, your effort may help me get back on the right track


regards
If you have experience in building Hackintosh and DSDT editing then go for this board other wise it would be wiser to choose the following boards:


  • GA-Z77-DS3H
  • GA-Z77X-UD5H
  • GA-Z77X-UP5 TH
  • GA-Z77X-UP7
  • GA-H77M-D3H
  • GA-H77N-WIFI
  • GA-Z77N-WIFI
Reason is that for novices in Hackintoshing there are AIO patches for these boards by Pjalm.

If you don't have budget for these boards then go for GA-EP35-DS3L as in my experience this is the easiest one to Hackintosh, if you cant find one contact me and I may consider selling a working Hackintosk ML 10.8.3 of the same board at a reasonable price. Alternately head over here
http://wiki.osx86project.org/wiki/index.php/Main_Page
and find the easiest hackintoshable parts.
 
Last edited:

max414

Proficient
Sep 18, 2010
530
0
21
Copenhagen, Denmark
If you have experience in building Hackintosh and DSDT editing then go for this board other wise it would be wiser to choose the following boards:


  • GA-Z77-DS3H
  • GA-Z77X-UD5H
  • GA-Z77X-UP5 TH
  • GA-Z77X-UP7
  • GA-H77M-D3H
  • GA-H77N-WIFI
  • GA-Z77N-WIFI
Reason is that for novices in Hackintoshing there are AIO patches for these boards by Pjalm.

If you don't have budget for these boards then go for GA-EP35-DS3L as in my experience this is the easiest one to Hackintosh, if you cant find one contact me and I may consider selling a working Hackintosk ML 10.8.3 of the same board at a reasonable price. Alternately head over here
http://wiki.osx86project.org/wiki/index.php/Main_Page
and find the easiest hackintoshable parts.
Thank you for the input

I already have a working hackintosh with ML 10.8.3 and everything works with the board I have

It wasn't that hard to figure out

Don't need yours now so you shouldn't consider selling..

Regards and mods close the thread plz

Sent from my GT-N7100 using Tapatalk 4 Beta
 

assuc

Re-Engineered.
Nov 1, 2008
635
0
21
Karachi
my power supply not functioning properly. i checked out voltages by multimeter and they aren't proper, so could anyone tell me if power supply can be repaired? from where?
 

lostworld

Intermediate
Jan 4, 2012
172
0
21
Karachi
Dear Pc guru's,

i have a problem with my lancard which is unresolvable by me, problem is that i have every thing ok in my system... bios updated driver installed but lan is not showing in device manager n when reinstalling the lan driver it says..... there is no active adapter found or if its in deep sleep mood please plug the cable...

guys need help regarding this problem.....
 

mansoor93

Active member
Jun 7, 2013
258
0
21
Karachi
help me out i have a serious issue with my laptop. its hp dv7 3065dx, it runs fine on battery(no matter what i do) but when i plug the charger,after 1-2 minutes the display goes off completely and laptop behaves like its stuck. the laptop can only be charged when its off or its on hibernation. please help me out what should i do with it.
 

Izzan

Hello!!!!
Jul 18, 2010
105
0
21
Rawalpindi
Hey guys my seagate barracuda 1TB hdd`s board got toasted the other day i need to replace it and cant find the board anywhere in saddar .... any shop recommendation in pindi / islamabad ???? :crying:
 

Syed005

Intermediate
Aug 7, 2012
123
0
21
Bannu/Abbotabad
Dear Pc guru's,

i have a problem with my lancard which is unresolvable by me, problem is that i have every thing ok in my system... bios updated driver installed but lan is not showing in device manager n when reinstalling the lan driver it says..... there is no active adapter found or if its in deep sleep mood please plug the cable...

guys need help regarding this problem.....
Check it out from the bios!see if its not disabled and if not then make it sure that u installed the correct driver for it.
 

Syed005

Intermediate
Aug 7, 2012
123
0
21
Bannu/Abbotabad
i need to replace a my cooler master 600w psu's fan, few months ago it was only noisy so i used motor oil and it seemed to fix it , but now the fan is permanently dead. need real help here, do i get any specific fan ?
Bro 1st make it sure which fan is used in it!(i.e 120mm or 140mm)u can find it in the psu's specification & then u need to check whether fan is soldered on the PCB or with plug in connector
 

usama1990

Usama
Feb 6, 2013
22
0
1
34
Karachi, Pakistan
Hi, I build my pc about 3 months ago and never had a problem until now when i change boot settings in the uefi bios. My pc is restarting again and again and not booting. Its like its stuck in a loop. I don't know what to do. I've build 4 Pc's before and never got that problem. My guess is its the motherboard problem. Can anyone help me please?
My rig is:

Intel 2600 i7 processor
Asus p8z77 v-lk motherboard
Corsair gs700 psu
Evga gtx 670 ftw
Corsair vengeance 8gb ram


- - - Updated - - -

Hi, I build my pc about 3 months ago and never had a problem until now when i change boot settings in the uefi bios. My pc is restarting again and again and not booting. Its like its stuck in a loop. I don't know what to do. I've build 4 Pc's before and never got that problem. My guess is its the motherboard problem. Can anyone help me please?
My rig is:

Intel 2600 i7 processor
Asus p8z77 v-lk motherboard
Corsair gs700 psu
Evga gtx 670 ftw
Corsair vengeance 8gb ram


- - - Updated - - -

Hi, I build my pc about 3 months ago and never had a problem until now when i change boot settings in the uefi bios. My pc is restarting again and again and not booting. Its like its stuck in a loop. I don't know what to do. I've build 4 Pc's before and never got that problem. My guess is its the motherboard problem. Can anyone help me please?
My rig is:

Intel 2600 i7 processor
Asus p8z77 v-lk motherboard
Corsair gs700 psu
Evga gtx 670 ftw
Corsair vengeance 8gb ram
 

prohyper

Proficient
Aug 24, 2011
837
0
21
Hi, I build my pc about 3 months ago and never had a problem until now when i change boot settings in the uefi bios. My pc is restarting again and again and not booting. Its like its stuck in a loop. I don't know what to do. I've build 4 Pc's before and never got that problem. My guess is its the motherboard problem. Can anyone help me please?
My rig is:

Intel 2600 i7 processor
Asus p8z77 v-lk motherboard
Corsair gs700 psu
Evga gtx 670 ftw
Corsair vengeance 8gb ram
Reverse the change you have made or Reset the bios settings
 

NADEEM 161

Training skip
Jul 29, 2009
317
3
23
karachi
first remove the battery from the motherboard and move the jumper there are three pins on motherboard near battery by the company default the jumper is on 1,2 pins move its to on 2,3 and power on the motherboard it give you some display may be or not after that place the battery and move to default pins 1,2 your bios have been completed reset after this
 
Status
Not open for further replies.
General chit-chat
Help Users
We have disabled traderscore and are working on a fix. There was a bug with the plugin | Click for Discord
  • No one is chatting at the moment.
    faraany3k faraany3k: Tears of Kingdom saal pehle shuru ki thee, ab tk pehle area se nai nikla. Life sucks donkey balls.