Here Comes my 690 :D

[KaShI]

it took me some time to decides whether to get TA-M11 or 690 , i am thankful to all those who suggested 690 and all those who showed their setup of 690

i had to pull out my board 5 times facing a different issue every time like loose case screw , unbalance etc ..in the end when i installed everything on board i faced a huge problem , my IDE connector pins on board got tilted and i had to disassemble every single thing on board because i have only 1 IDE connect and its direction is horizontal so i got totally F'ud up by that .....it took me 6-7 long exhausting hours to fully make my system to work and to my surprise i booted the OS already installed which i wasn't expecting ...i will look up for some addons later if i have some thing in my pocket to spend on it (DJ)


1. The Box



2. Card and DVD-RW






3. The Inside








4. My Workspace










Sorry for the bad image quality

 

[Nomad]

Congratulations :wink2:

Try to manage cables a bit better. Take the cable holder clips off and hide the cables behind the board.

 

[digitalism]

Congratzzz man. And welcome to CM690 Club Just do some cabling as Nomad said. It'll improve airflow inside the case hence lower temps.

 

[KaShI]

yes i had already planned that , last night it was 1 am when i finally ran my system and i was too tired to do anything at that time so i left it upto next day

 

[MrJayPlays]

Oh yea man i love this casing alot..
And yes try to manage the cables.take them from the back of the casing,thats what most of the people do
Overall nice rig..Congrats..

And btw which GPU is that GT250 or 260?
And what are your overall specs?

 

[Nomad]

^ That's XFX GTS 250

 

[Mr Magnificent]

congrats man

 

[opethian]

well congrats man
nice casing u got finally
waisay i dnt see any mod ... if ur posting in mod section just do a gud a cable mod atleast ...
baki yaar must add ur system details as well in post and in ur profile as well ...
add few fans ... some simple 100 rupees walay NMB walay ... n ur casing will be a heaven for ur computer parts ...
also 100 rupees ka paint ata hai and do interior paining as well ... no need to add ccfl so far as ur short on money ... so in total of 300 or 400 u can make it SUPER SEXY
(DJ)

 

[mostwanted]

my fav casing!!!
congrats dude.

 

[KaShI]

Here are the specs

CPU maker: intel
CPU: e4600 @ 2.8 gHZ
Motherboard: D975XBX2
GPU maker: nvidia
Graphics Card: XFX GTS 250 512MB
Memory: 2*1GB XMS2 DHX
Hard Drive: 500+160+250
Optical Drive: DVDRW+DVDROM
Power Supply: CM460
Display: Acer AL1916w 19"
Case: CM690
Sound Card: 8 channel Discrete
Speakers: Altec Lansing 251
Headphones: A4Tech HD800
Mouse: Oscar XL-740k
Mouse pad: Dell Promo
Keyboard: X7-G800
Operating System: WinXp SP3 Modified

 

[MavericKiz3d]

congrats man!

 

[Desolator]

Yeah its super duper awesome. I upgraded my old PC and got the Cm690 Nvidia edition for that one. Good air flow and good cable management options.

 

[KaShI]

i applied some routing algos on this and finally got front side free of cables and installed 2 small fans inside ...80% of the cables are at the back side now and the cable which i hate most is IDE

 

[theDarkDisciple]

^ congrats to you. put some time into cable management and see the drop in temps.

 

[AliGhanizad]

congrats bro,

 

[w00t]

Here are the specs

CPU maker: intel
CPU: e4600 @ 2.8 gHZ
Motherboard: D975XBX2
GPU maker: nvidia
Graphics Card: XFX GTS 250 512MB
Memory: 2*1GB XMS2 DHX
Hard Drive: 500+160+250
Optical Drive: DVDRW+DVDROM
Power Supply: CM460
Display: Acer AL1916w 19"
Case: CM690
Sound Card: 8 channel Discrete
Speakers: Altec Lansing 251
Headphones: A4Tech HD800
Mouse: Oscar XL-740k
Mouse pad: Dell Promo
Keyboard: X7-G800
Operating System: WinXp SP3 Modified

Congrats Dude! Did you Overclocked your CPU?