Case modding service for low price!

[AliGhanizad]

Asalam Alekum,
I hav joined PakGamers.com recently and hav found out that most of you are interested in modding your pc case but you dont hav enuf experience or time to do it. Therefore i hav thought that i am going to offer case modding service for people from all over Pakistan. I will be modding the case in the following ways. The charges of every mod is mentioned with it.

Case side, front, top Window mod = RS 800/window.

Case Interior Paint = 800

Case Exterior Paint = 700
Cable Management = 500

Case lighting = 1500 for every cold cathode tube installed


Note: For the paint job if you want more than one colour rs 150 will be charge with the initial charges. And the case lighting mod "the cheap way" shudnt be considered as a joke coz dis is really very successful , i hav done 4 such mods and dey all hav worked well.

I also want to add that I live in Peshawar and if u are living outside peshawar you can send your case to me via mail. I will be starting dis service as soon as possible.



For any more details PM or e-mail me at [email protected]

Allah Hafiz.

 

[opethian]

I also want to add that I live in Peshawar and if u are living outside peshawar you cant send your case to me.

is it a error or u mean it

baki yar to justify ur rate plz tell ppl how many coats ull apply what if the user dnt like the job done by u
plz share ur pics of the job u have done so far

must include pics otherwise ppl will not come to u as ur new n so far u have no reputation of any sort


these r just few advices dnt take them as some critique

 

[AliGhanizad]

is it a error or u mean it

baki yar to justify ur rate plz tell ppl how many coats ull apply what if the user dnt like the job done by u
plz share ur pics of the job u have done so far

must include pics otherwise ppl will not come to u as ur new n so far u have no reputation of any sort


these r just few advices dnt take them as some critique

Ya thanx a lot for your advice bro, i was thinking of tellin all d details but first i needed some replies and nw i m gona add d details. And as far as pics are concerned i m going to contact all d people for whom i hav modded d case. I mite find d pics of one case really quickly coz he lives nearby but i dont know abt the other pics and d addresses of their owners. And people from all over Pakistan can send their cases it was just a spelling mistake.

 

[asadjan9303]

This should've been in the market place dude !

 

[AliGhanizad]

Now I am going to tell you about the steps for every mod you want as opethian had suggested.

Case Window Mod. The case will be cutted first by a rotary tool and den a jigsaw after that it will be filed to smooth up the surface. And then at the end Arcylic Material will be used, any colour the client wants. The end result will be simply flawless.

Interior/Exterior Paint. The case will be first sanded with 200 grit paper then 400 grit paper and at the end it will be sanded with 500 grit paper with water. Then 2-3 coats of primer will be applied for the paint to stick more properly. After that 3-4 coats of paint will be applied. The colour and finish of d colour will be of users choice. Matte and Gloss finish are currently available. If the client asks for Gloss finish a coat of clear will also be applied.

Cable Management. Holes will be made in d case (if needed) to hide d cables more properly and zipties etc will be used.

Case Lighting. For the CCFL tubes there is no big procedure to mention. But as far as the cheap way is concerned i hav to say dat the bulbs will be installed in such areas where they wont be seen from outside, the input of d bulbs will be directly from the input of the power supply and a dimmer will also be installed for turning the light on/off and for dimming it.


If you live in Peshawar then dere s no problem and if u live outside Peshawar den u can send d case via mail/daewoo service. And i will send d case back to you again by mail/daewoo service. The modding should take abt 2-3 days.

I hope you like my idea and way of modding.

---------- Post added at 10:32 PM ---------- Previous post was at 10:31 PM ----------

This should've been in the market place dude !

Great idea bro, now i m gona add dis in d market place too, thanx

 

[shajeel]

Well i guess after reading the steps mentioned above i would say the guys knows what hes talking about....BUT im not confirm about this until he shows us pics....

ALI can u match my work? check my various threads in this forum (modders workshop)....and let everyone know...

cause i was one of the first one to mod my pc (well our pc's as the other guy is a friend Zaitron)...WE were the first ones here to mod our rigs...and the ppl here ...SO KIND that they are greatly respected our work....

So i guess if u can show me your work ..I would be kind enough to recommend you....

So impress me man...cause when i'll recommend you...it'll really boost ur service sales....Trust me

Btw i too have been modding cases for quite some ppl over here in lahore...a similar service

 

[AliGhanizad]

Well i guess after reading the steps mentioned above i would say the guys knows what hes talking about....BUT im not confirm about this until he shows us pics....

ALI can u match my work? check my various threads in this forum (modders workshop)....and let everyone know...

cause i was one of the first one to mod my pc (well our pc's as the other guy is a friend Zaitron)...WE were the first ones here to mod our rigs...and the ppl here ...SO KIND that they are greatly respected our work....

So i guess if u can show me your work ..I would be kind enough to recommend you....

So impress me man...cause when i'll recommend you...it'll really boost ur service sales....Trust me

Btw i too have been modding cases for quite some ppl over here in lahore...a similar service

To tell you the truth bro, u were the one bcoz of which i started this service on Pakgamers. Coz i saw a link to your thread in some other website on which you had offered these mods . I hav also offered dese mods but on a very low price . In dese prices you better know that i mite only get 5-10% profit. But dis is just to get some respect on PakGamers. Until now i hav been modding cases for ma friends and school fellows and their friends but inshAllah after nw i mite also mod cases for PakGamers.

---------- Post added at 11:28 PM ---------- Previous post was at 11:01 PM ----------

now i hav added some low quality pics which ma client sent me on mail, but i hav asked him to send me some high quality pics after cleanin the riq coz nw its dirty as hell, lol. And dis guy will clean and take pics from it den and send it to me coz i know him and he is ma frien.

---------- Post added at 11:50 PM ---------- Previous post was at 11:28 PM ----------

hey guys i saw the pics more carefully and found out that d cable management dat i had done for dis case has been totally disturbed coz d cables are all lying around the area. I am thinkin of goin to dis friend of mine's house and do d cable managements etc again and clean it a bit and den take the pics. In that way you will see ma job. Anyways u can see d cleaness of the window and the finish of the paint in these pics too. And this case had d cheap way of lighting mod.hahahahaha

 

[Krotos]

yaar i need just a couple of fans installed in my case and the noise issues of the fans solved what will u charge for that i already got 2 80nm fans with me,

 

[AliGhanizad]

yaar i need just a couple of fans installed in my case and the noise issues of the fans solved what will u charge for that i already got 2 80nm fans with me,

noise issue isnt a problem coz we can slow down the fast speed by swaping the wires. The issue of installin fans can also be solved. I can buy new fans for you and install dem, if cutting the case is required that also not a problem. I will charge you abt rs400 altogether to dis job

 

[Obaid Anwar]

Hey .. Salaam all
i recently got to knw abt ALI that he is offering for case moddification.. so i thought to let u knw guyz that This person had modified a case for me With some internal paint job and window casing.
i had that case for 2 months and guess wot i sold it with around 1000 thousand profit for selling the CASE only.
Ali had reeli cost me high for PAINT rs. 700 and for WINDOW CASING 800 rs.
but i knw y is he offering such a low rate.
to gain some respect hehe..
I really appriciate his work.. and thought that i shall tell u guyz.. he reeli workd hard on my PC CASE to give it a reeli different look.

 

[theDarkDisciple]

do you use a rubber lining (or something similar) for the 'side window' mod?

 

[Dark Sith]

lolll , bro strange as how can u do the inner and outer paint job in such low cost ways , just for the sake of argument , i mooded quite a no of cases .


the min paint job in the outside is going to cost atleast 1500-1800 the inners the a liitle less 1000-1200 , dude its not the paint , its the primer , finisher , lacuquer , sand papering it , final touch sprays etc .

but that cheap u have my vote ...

cuting side panels is costing Rs.200 here and arcylic costs about Rs.100-150 . u attach it with double tape from the inside of the case.

case fans can be had in raja bazzar at the following rates

40mm = 50
80mm = 50-90
120mm = 150
220mm = 375-500

neons blue 1 foot = 350 - 400
2 8inch neon high glow tube complete package = 500-675
uv paint = 200 per can


anyway wanted to share with u guys .

 

[AliGhanizad]

YA I KNOW all these prices bro,but i hav had enuf of profits from ma last 10-20 mods so now i m just charging d cost price and no profit, no labour charges just for the sake of gaining more and more customers. and the lights dat i hav mentioned in ma thread are not neons, dey r ccfl tubes and dey r much expensive dan neons. I hav lots of cans of primer, laquer, finisher, and sandpapers are lying around like ma school registers wid me lol. From 100-3000 grit is available wid me and i use dem bro. Cutting isnt a problem coz i hav d tools myself. And i hav ordered a new rotary tool from Dubai and ma dad will bring it in first week of April. Den we will see wat happens. And den i will also increase d rates.

 

[AliGhanizad]

MODS PLXXX CLOSE THE THREAD, i m busy wid ma studies and i will start dis service when i get my new tools for modding in Summer Vacations.

 

[86stroker]

is it a error or u mean it

baki yar to justify ur rate plz tell ppl how many coats ull apply what if the user dnt like the job done by u
plz share ur pics of the job u have done so far

must include pics otherwise ppl will not come to u as ur new n so far u have no reputation of any sort


these r just few advices dnt take them as some critique

Agreed Bro ...

 

[shujaswati]

hey stroker, read the date before u quote somebody.