Hey Guys spent the Sunday Modding the CM HAF 932 casing.. and i must say am very impressed with this casing.... it an extremely versatile casing...especially for the extreme modders... not only does it support dual PSU's (one the top as well as bottom) but also u can install any water cooling unit, with out any hassles or hacking what so ever....the casing has awesome cable management potential as well as you can install any after market cpu cooler without removing your mother board from the tray as it has an opening at the back large enough to easily fit you hand through.... hehe...
Well enough said about the casing itself lets talk about the mod now....
Basically all i did was paint the inner stock silver to black..Mat black...to some it might seem a very inconsequential mod ... but this is just the beginning... as before doing anything else the base has to be set..and what better base to match with the exterior Black...Interior Black as well....
So let the pic speak the rest..even though they are of poor quality...i find taking pics with my mobile the most easiest thing to do while doing a mod....
The Box with the HAF inside...
Removed all the inner's...except the 5.25 Drive Bay Locking Clips and the PCI Slot locking clips....i decided not to remove them of the fear they might break as they seemed some what fragile...So just masked them..
The Panels Before the Paint...
Masking the Casing Sides & Glass Panel
About to Start....& First Coat..
Assembling
All Done
Hope You guys liked this basic mod..... Like i said this is just the beginning.... Very soon will be getting the works done on this casing....UV Paint..some new innovative designing... might even look into exterior modding..lets see... keep ur fingers crossed...and keep tuned...
Cheers and Happy Modding
Well enough said about the casing itself lets talk about the mod now....
Basically all i did was paint the inner stock silver to black..Mat black...to some it might seem a very inconsequential mod ... but this is just the beginning... as before doing anything else the base has to be set..and what better base to match with the exterior Black...Interior Black as well....
So let the pic speak the rest..even though they are of poor quality...i find taking pics with my mobile the most easiest thing to do while doing a mod....
The Box with the HAF inside...
Removed all the inner's...except the 5.25 Drive Bay Locking Clips and the PCI Slot locking clips....i decided not to remove them of the fear they might break as they seemed some what fragile...So just masked them..
The Panels Before the Paint...
Masking the Casing Sides & Glass Panel
About to Start....& First Coat..
Assembling
All Done
Hope You guys liked this basic mod..... Like i said this is just the beginning.... Very soon will be getting the works done on this casing....UV Paint..some new innovative designing... might even look into exterior modding..lets see... keep ur fingers crossed...and keep tuned...
Cheers and Happy Modding
Last edited: