temps of new e5300

[usmankh10]

i bought a new e5300 core temp nd speed fan show temp of both cores as 36C idle nd even on 100% load da max goes to 46 even i ave overclocked to 3.2ghz wid stock cooler ,r dese softwares showing temp wrong???on idle da r like fixed to 36C nd my previous e2180 65nm temps on idle were in below 30C!!!wat is wrong???

[fajoo24]

i bought a new e5300 core temp nd speed fan show temp of both cores as 36C idle nd even on 100% load da max goes to 46 even i ave overclocked to 3.2ghz wid stock cooler ,r dese softwares showing temp wrong???on idle da r like fixed to 36C nd my previous e2180 65nm temps on idle were in below 30C!!!wat is wrong???

first of all check with Realtemp and see what temps. you are getting........ur temps are good, e5300 runs cooler and also as you are in lahore, it must be pretty cold there, so ambient temps would also have gone down due to which you are getting lower temps......

however, 46 degrees on load doesn't look real, stress ur gpu using OCCT and see what temps. you get.....

[usmankh10]

y idle temps r so high??on my overclocked e2180 to 2.5ghz temps were below 30!

[abobobilly]

y idle temps r so high??on my overclocked e2180 to 2.5ghz temps were below 30!

As Fajoo said ... Kindly check the temps with Real Temp and Report back. If possible, post a Picture here as well

[fajoo24]

y idle temps r so high??on my overclocked e2180 to 2.5ghz temps were below 30!

Now wait a sec, you posted this thread thinking that your temps are high ............bhai those are some excellent temps, i am not sure how you got 30 degrees with e2180, may be u were using intel speed step and thoese idle temps were on lower clock......there is also a possibility, your temp. monitoring software wasn't giving u correct results.....however, that is history, u have e5300 now and refer to my first post and do as suggested there for monitoring temps and stressing the cpu....

[Baber Kamal]

Yar ur sensors are stuck at 36c, so in reality ur temps will be around 26-28c as my E5300 has 28c idle.

Now whenever ur temps will go above 36c ur sensors will start workng but below it they will not work. My E5300 has one stuck sensor at 34c while other is perfect. So as soon as my temp go above 34c my other sensor also starts working.

[usmankh10]

i ave checked temp wid real temp same result nd babar kamal is rite my both core temp r stuck at 36 C wen temp goes up 36C sensors start working!!!

[AFQ]

Both sensors on my E6300 are stuck.
they dont go below 38 whatever the temp is.
i think its common problem with the new R0 series.