GPU Issues.

[Blastwave]

o bhai keep your finger at the fan not letting it move. Zahir hai **** jana tha pankhay nay :P

@OP try the two x 120mm fans around the GPU setup like shary. Ask him for the pic.

I put on clips on the fans before I use the blower.

I'm considering getting a new card to replace the GTX 275 and deal with the 6850 differently.

[Serious Sam]

Belcome Wack man! keep calm and carry on!

Ambient room temperature is 20. Ive tried to keep the air conditioner on for hours before playing a game and same fucking result.

Thanks .

Dont know. Depends on how old and used they are. If more than an year old with stock TPU, then do apply it. If things dont get better, then at least you will know that Thermal paste is out of equation .

o bhai keep your finger at the fan not letting it move. Zahir hai **** jana tha pankhay nay :P

I know about that. Told my first time experience.

I put on clips on the fans before I use the blower.

Clips?

Spoiler: show

btw wth is with all this purble names

[Ali Man]

Well then you can lastly do wht everyone's saying about the thermal paste thing and see wht happens but just be careful on doing it as GPU's are much more sensitive than CPU's .....

[Blastwave]

Thanks .

Dont know. Depends on how old and used they are. If more than an year old with stock TPU, then do apply it. If things dont get better, then at least you will know that Thermal paste is out of equation .

Clips?

Spoiler: show

btw wth is with all this purble names

Card was bought in 2009 when it hit the shelves.

Changing the thermal paste is way out of the question since I've royally fucked up one of the screws and its more like a deep dead nail now.

I'm supporting a purple heart because I contributed to the glory of Pakgamers.

You contribute/donate to Pakgamers, they give you a heart and a purple badge. I like it. I like being part of this place here.

CLIPS

Spoiler: show

---------- Post added at 04:03 AM ---------- Previous post was at 03:57 AM ----------

I just tried that manual addition of vsync() into dead island setting file and the temperature has gone down by 10 degrees. Stable at 75. still High I'd say.

[Cerberus]

do u find any glitches while gaming...at such high temps games should have artifact or its just a bad sensor in GPU

[AbbY]

Card was bought in 2009 when it hit the shelves.

Changing the thermal paste is way out of the question since I've royally fucked up one of the screws and its more like a deep dead nail now.

I'm supporting a purple heart because I contributed to the glory of Pakgamers.

You contribute/donate to Pakgamers, they give you a heart and a purple badge. I like it. I like being part of this place here.

CLIPS

Spoiler: show

---------- Post added at 04:03 AM ---------- Previous post was at 03:57 AM ----------

I just tried that manual addition of vsync() into dead island setting file and the temperature has gone down by 10 degrees. Stable at 75. still High I'd say.

Bro try the fan method and see if you can find some better cooling for the system. By better cooling, i mean some more planned air flow and cable management. Also drive the fan speed manually to 100% using amd overdrive.

[Pink PanthEr]

open msiafterburner,
goto settings,
check unlock voltage control>apply ...
open it again and press "reset" button>apply
set fan speed to 100% manually.

check the temperatures,report back.

[GhaniKhan]

Just open ur card and clean all the dust then check it.....

[Serious Sam]

Card was bought in 2009 when it hit the shelves.

Changing the thermal paste is way out of the question since I've royally fucked up one of the screws and its more like a deep dead nail now.

haha who said you to use knives?

[Blastwave]

haha who said you to use knives?

It didn't listen to me! I swear! I tried to be fair, I tried being kind. It had it coming.