which gpu to go for?

[Baber Kamal]

@devil: bro kindly read my post carefully i clearly stated that i hate inno3d and xfx cards with single slot coolers, and i know ichill series is the best.

[AliGhanizad]

nops bro i m not sellin ma 4830 but i wanted to tell u one thing dat wen i was buyin it i searched n read lots of reviews and found out that 9800gt gives 5-6 more fps in low resolutions like 1440x990 dan d 4830 while d 4830 gives abt 7-10 more fps dan d 9800gt at resolutions above that. So u mite wanna get the 9800gt for yourself but one thing is dere dat is dat wen u turn on the antialiasin at any resolution d 9800gt jus cant match d 4830 and give abt 15-20 fps lower dan d 4830. So is d case wid 4850. So if u ask me i wud tell u to go for Ati.

[Baber Kamal]

here's my psu ratings

http://c1.neweggimages.com/NeweggIma...171-015-05.jpg

1. will it be enough for palit 4850?

2. My psu doesn't have any pci-e connector, so i'll be using 4 molex connectors for two 6 pin pcie conectors, so will this config work ok and will it be better than CM460 which has 26 amps?

3. My mobo has 16x pci e slot, i know the card will work but will it work upto it's fullest or will be bottleneked due to 16x slot?

[Voodoo]

here's my psu ratings

http://c1.neweggimages.com/NeweggIma...171-015-05.jpg

1. will it be enough for palit 4850?

2. My psu doesn't have any pci-e connector, so i'll be using 4 molex connectors for two 6 pin pcie conectors, so will this config work ok and will it be better than CM460 which has 26 amps?

3. My mobo has 16x pci e slot, i know the card will work but will it work upto it's fullest or will be bottleneked due to 16x slot?

ur PSU is not sufficient for palit 4850, see the home page of this card

http://www.palit.biz/main/vgapro.php?id=1101

u may run this card on ur current psu for a while, but for continuous use u must update ur psu, especially if u go for processor overclocking, or use quad core,

for safe side, try to get cooler master 600 watt psu (if u will go for palit 4850), which has 2 x 6 pin pcix connectors, b/c ur processor is already overclocked,

the card will run almost on its full performance with ur current cpu (i think e2220 @ 3300 mhz), ur m/b slot is not an issue,

[Newbie]

3. My mobo has 16x pci e slot, i know the card will work but will it work upto it's fullest or will be bottleneked due to 16x slot?

I don't think ur 16x pci will bottleneck because even high end card don't use full bandwidth