Ptcl evo 3G Huawei EC1260-2 with TP-Link 3220 Configuration.
If you have already called the help line then you must be misguided to upgrade your router's firmware and you might have updated the firmware of your router to 110112. If you haven't then its good but if you have then you must restore to your original firmware. After doing that follow these instructions.
1- Go To Quick Setup
2- Check on 3G only and click next
3- Check on Manual APS box
Now Enter The Following details
Dial number: #777
APN: (leave it blank)
Username: [email protected]
4- Now save it and you will be asked for your Wlan configuration configure it according to your use.
I was having this problem myself and i was being misguided by the csr/ccr's. But some how i managed to connect it any way.
I am getting below error
Unknow PIN status, please insure that your SIM/UIM is on unlock status
Use the April firmware release.
The problem is that you are using the June firmware release in which TPlink has added the pin field.
Downgrade to the April release and the above settings will work fine.
Tags for this Thread
All times are GMT +5. The time now is 04:38 AM.
Back to Top
Copyright © 2014 PakGamers. All rights reserved.
A part of Avid Media Network Pvt. Ltd.